• Home
• All Products
• New Products 2008
• The Wheeler Advantage
• Tool Diagrams
• Inquiry Form
• Our Profile
• Industry Links
• Features & Advantages
• Testimonials
• Literature Gallery

Click here to download the 2008 Wheeler Catalog in PDF format.

Visit our Literature Gallery for more documents.

THE PIPEMASTER

General Information:

Unit consists of a cutting head with internal gears which operate the drive wheels and blade shaft. Cutting blades (except for No. 4616) must be cooled with water during cutting and are fully enclosed for safety. The cutter is held onto the pipe by a wide roller chain which is tensioned with a threaded take-up mechanism. A chart is included which tells the operator how much chain is required for various sizes of pipe. The unit has a hydraulic motor which requires an external hydraulic power source.

See these pipe cutters in action in our video gallery!

4624 PipeMaster 6" to 24" (50-600mm) Shipping Weight 99 lbs. (45kg)

4648 PipeMaster 6" to 48" (50-1200mm) Shipping Weight 112 lbs. (51kg)

Accessories:

6500 Hydraulic power pak 232 lbs. (105.5kg)

4606 6" diameter diamond blade for CI, DI & clay

4616 6" economy diamond blade for DI Pipe

4706 6" tungsten carbide tipped blade for steel

276693 Water supply tank, 4 gallon

4685 Steel wedge, set of 6

4686 Roller chain, one link section

276288 Flat face male quick disconnect

276289 Flat face female quick disconnect

 

PipeMaster Features:

• Construction:
  Aluminum gearbox and side plates
  Steel & bronze gears
  Steel roller chain
  Drive wheels are aluminum with urethane covering
• Gearbox:
  Worm Drive with 80-90W gear oil
• Cutting Speed:
  3" (150mm) of surface travel per minute
  1" (25mm) of diameter per minute
• Cutting Clearance:
  Radial 8" (200mm)
  Axial 16" (400mm)
• Blade Speed:
  1200 rpm
• Cutting Head Wt:
  35 lbs. (16 kg)
• Hydraulic Requirements:
  6 gpm (22 lpm) at 1500 psi (105.5 kg/cm2)

6500 Hydraulic Power Pack Features:

• 6.5hp Honda Engine
• Two 20' hoses with FF Quick Connectors
• 4gpm
• 1500psi

Number of Chain Links Required:

Pipe Diameter	18 (450mm)	25 (700mm)	40 (1000mm)	54 (1350mm)
Number of Links	21 pieces	34 pieces	51 pieces	71 pieces

UNIVERSAL DIAMOND BLADE

Universal Diamond Blade for DI and CI pipes. Will fit Wheeler PipeMasters as well as Universal and Utility Cutters from Reed Manufacturing, Keel and WACHS. Cut dry or wet. Low price and excellent performance make this blade the best value on the market!!!

4616 6" economy diamond blade