• Home
• All Products
• New Products 2009
• The Wheeler Advantage
• Tool Diagrams
• Inquiry Form
• Our Profile
• Industry Links
• Features & Advantages
• Testimonials
• Literature Gallery

Click here to download the 2009 Wheeler Catalog in PDF format.

Visit our Literature Gallery for more documents.

THE PIPEMASTER

General Information:

Unit consists of a cutting head with internal gears which operate the drive wheels and blade shaft. Cutting blades (except for No. 4616) must be cooled with water during cutting and are fully enclosed for safety. The cutter is held onto the pipe by a wide roller chain which is tensioned with a threaded take-up mechanism. A chart is included which tells the operator how much chain is required for various sizes of pipe. The unit has a hydraulic motor which requires an external hydraulic power source.

See these pipe cutters in action in our video gallery!

4624 PipeMaster 8" to 24" (200–600mm) Shipping Weight 99 lbs. (45kg)

4648 PipeMaster 8" to 48" (200–1200mm) Shipping Weight 112 lbs. (51kg)

Different drive wheels are required to cut 6" pipes (see accessories listed below).

Accessories:

700970 Drive wheels for 6" pipe (2 required)

4606 6" diameter diamond blade for CI, DI & clay

4616 6" economy diamond blade for DI Pipe

4706 6" tungsten carbide tipped blade for steel

276693 Water supply tank, 4 gallon

4685 Steel wedge, set of 6

4686 Roller chain, one link section

276288 Flat face male quick disconnect

276289 Flat face female quick disconnect

PipeMaster Features:

• Construction:
  Aluminum gearbox and side plates
  Steel & bronze gears
  Steel roller chain
  Drive wheels are aluminum with urethane covering
• Gearbox:
  Worm Drive with 80-90W gear oil
• Cutting Speed:
  3" (150mm) of surface travel per minute
  1" (25mm) of diameter per minute
• Cutting Clearance:
  Radial 8" (200mm)
  Axial 16" (400mm)
• Blade Speed:
  1200 rpm
• Cutting Head Wt:
  35 lbs. (16 kg)

6500 Hydraulic power pak. Complete with 6.5hp Honda engine, 6gpm, 1500 psi and two 20' hoses with FF quick connectors. 232 lbs. (105.5kg)

701185 Bypass Valve 6 gpm/1500 psi 10 lbs. (4.6kg)
The Model 701185 is a Bypass Valve Kit designed to be used with your skid loader, backhoe or tractor for the Wheeler Rex PipeMaster. The 701185 will adapt your current hydraulic system to the specs required to operate the PipeMaster. (6 gpm and 1500 psi required) Portable at 10 pounds and easy to connect. The PipeMaster’s hydraulic lines will directly attach to the quick disconnects for both input and output points on the Bypass Valve. Hydraulic lines not included (between hydraulic power source and bypass valve).

Number of Chain Links Required:

Pipe Diameter	18" (450mm)	25" (700mm)	40" (1000mm)	54" (1350mm)
Number of Links	21 pieces	34 pieces	51 pieces	71 pieces

UNIVERSAL DIAMOND BLADE

Universal Diamond Blade for DI and CI pipes. Will fit Wheeler PipeMasters as well as Universal and Utility Cutters from Reed Manufacturing, Keel and WACHS. Cut dry or wet. Low price and excellent performance make this blade the best value on the market!!!

4616 6" economy diamond blade