WRENCHES, PLIERS & FASTENING TOOLSWRENCHES, PLIERS & FASTENING TOOLSCatalog Navigator

TWINTITE

TwinTite New!Click here to Find a Wheeler-Rex Distributor

For torquing both screws simultaneously. The TwinTite attaches to most 3/8" reversible cordless drills. Fits couplings 1 1/2" to 4". Individual torque settings allow each clamp screw to be tightened to correct torque specification. The torque is preset to 60in lbs. or 80in lbs. and can be recalibrated with a torque wrench. The TwinTite is quick and easy to attach to your drill and the wire form can be bent to fit other drills.

1990 TwinTite 60in/lb. with 5/16" replacement socket 2.5 lbs. (1.2kg)

1992 TwinTite 80in/lb. with 5/16" replacement socket 2.5 lbs. (1.2kg)

1994 TwinTite 80in/lb. with 3/8" replacement socket 2.5 lbs. (1.2kg)

TwinTite in ActionAttachment procedure is 3 simple steps:

  1. Place gear box shaft in drill chuck and tighten
  2. Place wire form around drill handle and wire ends into clamp holes on bottom of gear box and tighten screws.
  3. Assemble 2-piece clamp around wire form near drill handle base and tighten the screws.

SOIL PIPE COUPLING TORQUE WRENCH

1977 SOIL PIPE TORQUE WRENCH This durable "T-Handle" type torque tool with a contoured comfort-fit handle features a removable socket and a unique locking collar, which allows the tool to be used as an untorqued snug-up or back-off, as well as a conventional torque tool. With the locking collar retracted, the tool torques to the right (tightening), while ratcheting to the left. When proper torque value has been achieved, the mechanism slips internally and over-tightening is impossible.

1977 T-Torque for tightening 5/16" coupling nuts to 60 in. lbs. Weight 1 lb. (.5kg)

1980 T-Torque for tightening 5/16" coupling nuts to 80 in. lbs. Weight 1 lb. (.5kg)

1981 T-Torque for tightening 3/8" coupling nuts to 80 in. lbs. Weight 1 lb. (.5kg)

1982 T-Torque for tightening 5/16" & 3/8" coupling nuts to 80 in. lbs. Weight 1 lb. (.5kg)

275410 5/16" Replacement Socket

275818 3/8" Replacement Socket

NO-HUBŪ COUPLING WRENCHES

1964 Fastite Coupling Wrench Invented by Wheeler-RexWheeler-Rex powered No-HubŪ Coupling Wrenches tighten or loosen couplings in just a few seconds. The tools can be used with most 3/8" reversible electric drills. They can be installed and removed as quickly as a drill bit. Automatic clutch in torque heads prevent over and under tightening. Recalibration is easy with a torque wrench.

1964 Fastite For tightening 5/16" coupling nuts to 60 in.lbs.
Shipping Weight 9 oz.

1965 Fastite Plus For tightening 3/8" coupling nuts to 80 in.lbs.
Shipping Weight 9 oz.

1966 Fastite Plus For tightening 5/16" coupling nuts to 80 in.lbs.
Shipping Weight 9 oz.

1974 Fastite Two For tightening 1/4" coupling nuts to 80 in.lbs.
Shipping Weight 9 oz.