CRIMPING TOOLSCRIMPING TOOLSCatalog Navigator

CLOSE QUARTERS CRIMP TOOLS

89216 3/4" Close Quarters Crimp Tool A unique tool designed for 1/2" and 3/4" pipe sizes. These tools provide a toggle action which helps to assure a complete crimp cycle. Light weight with a comfort fit handle, its high mechanical action allows one hand crimping to ASTM specifications. OAL 12"

89215 1/2" Close Quarters Crimp Tool 2 lbs.

89216 3/4" Close Quarters Crimp Tool 2 lbs.

89217 CLAMP CRIMPER

89217 CLAMP CRIMPER The close quarters tool crimps rings to ASTM F-1087 on 3/8", 1/2", 3/4", and 1" pipe. A wrench is used to torque the bolts down until the gap is eliminated. Convenient 1" and 3/4" on one side, flip over and 1/2" and 3/8" on the reverse. Complete with a gage to assure crimps are to specifications. OAL 3 1/2"

Weight 1.5 lbs.

89211 CLAMP REMOVAL TOOL

89211 CLAMP REMOVAL TOOL This unique tool allows fitting recovery with an effortless torquing action. Apply the socket to a "T" bar or socket wrench and place over the pinched clamp. By turning 90 degrees in a clockwise action and then counter-clockwise the clamp is sheared making fitting recovery quick and easy. Remove all clamps 3/8", 1/2", 5/8", 3/4" and 1" with ONE tool. Wrench nut supplied.

Weight 2 lbs.

89220 CRIMP KIT

89220 CRIMP KIT A 1" Crimp Tool with interchangeable die inserts. Kit comes with 1/2", 3/4" and 1" inserts in a convenient carrying case with a crimp gage. Optional 3/8" and 5/8" inserts are available. Die inserts are easily changed without tools. No calibration procedure is required and all crimps conform to ASTM F-1807 specifications. Kit includes the 89210 Ring Remover.

Weight 8.5 lbs.

DIE SETS:

892201

3/8" Die Set for 89220

892202

1/2" Die Set for 89220

892203

5/8" Die Set for 89220

892204

3/4" Die Set for 89220