Drilling and Tapping Tools
| Capacity: from 3/4" to 2" (19–50mm) in Steel, Cast Iron, Ductile, and Plastic Pipe. The Wheeler-Rex Hot Tapping System is hand operated and designed for drilling holes in active water lines up to 250 psi. It is lightweight and easy for one man to set up and use. Complete with 6515 ratchet, tool box, adapters and cutter shells for making 3/4" (19mm) and 1" (25mm) holes. Adapters and cutter shells for over 1" do not come with standard kits and must be purchased separately. |
| |
Shipping weight (all models) |
|
26 lbs. (11.8kg) |
| 8100 |
With 3/4" and 1" (19–25mm) HSS cutters and adapters to fit NPT threads. |
|
| 8200 |
With 3/4" and 1" (19–25mm) HSS cutters and adapters to fit flared (CTS) ends. |
|
| 8300 |
With 3/4" and 1" (19–25mm) HSS cutters and adapters to fit BSPT threads. |
|
| |
Built-in bleed-off valve allows chips to be flushed away. |
|
| Wheeler Part No. |
Description |
| 802051+ |
3/4" NPT Adapter |
| 802053+ |
1" NPT Adapter |
| 802055 |
1 1/4" NPT Adapter |
| 802057 |
1 1/2" NPT Adapter |
| 802059 |
2" NPT Adapter |
| Wheeler Part No. |
Description |
| 802050* |
3/4" CTS Flare Adapter |
| 802052* |
1" CTS Flare Adapter |
| 802054 |
1 1/4" CTS Flare Adapter |
| 802056 |
1 1/2" CTS Flare Adapter |
| 802058 |
2" CTS Flare Adapter |
| Wheeler Part No. |
Description |
| 802071• |
3/4" BSPT Adapter |
| 802072• |
1" BSPT Adapter |
| 802073 |
1 1/4" BSPT Adapter |
| 802074 |
1 1/2" BSPT Adapter |
| 802075 |
2" BSPT Adapter |
| Wheeler Part No. |
Description |
| 802060 |
1 1/2" Adapter |
| 802061 |
2" Adapter |
| Wheeler Part No. |
Description |
| 903071*+• |
3/4" HSS Shell Cutter |
| 903072*+• |
1" HSS Shell Cutter |
| 903073 |
1 1/4" HSS Shell Cutter |
| 903074# |
1 1/2" HSS Shell Cutter |
| 903075# |
2" HSS Shell Cutter |
| Wheeler Part No. |
Description |
| 904065 |
3/4" Carbide Tip Shell Cutter |
| 904066 |
1" Carbide Tip Shell Cutter |
| 904067 |
1 1/4" Carbide Tip Shell Cutter |
| 904068 |
1 1/2" Carbide Tip Shell Cutter |
| 904069 |
2" Carbide Tip Shell Cutter |
| Wheeler Part No. |
Description |
| 5800 |
3/4" Shell Cutter for C-900 Plastic |
| 5801 |
1" Shell Cutter for C-900 Plastic |
| 802084 |
1 1/2" Shell Cutter for C-900 Plastic |
| 802085 |
2" Shell Cutter for C-900 Plastic |
| Wheeler Part No. |
Description |
| 6515 |
1/2" Square Male Drive Ratchet |
| 908097# |
Threaded Adapter for HSS Shells (comes standard with 1 1/2" & 2" Cutter Shells) |
| 908094 |
Center Drill |
+Included with 8100 System
*Included with 8200 System
•Included with 8300 System
#Adapter included with Cutter Shell
Wheeler Manufacturing, A Division of 